Clear PET filmFilm rollSP-TAPE60Z
One side carries a FreePost® removable cling layer — Easy Cling™ flat cling, WALLIZARD® micro-dot or Spider™ dot adhesive — the other a high-tack permanent adhesive. The permanent side laminates to the back of a print; the removable side applies to glass or smooth walls and peels away clean.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | SP-TAPE60Z |
|---|---|
| Base / Surface | Clear PET film, High-tack permanent side + Spider™ dot removable side |
| Adhesion system | Double-Sided Cling & Adhesive Tape |
| Print compatibility | Not printed — for laminating prints |
| Film thickness | 60±6 μm |
| Total thickness | 240±12 μm |
| Available sizes | Standard: 1370mm × 50m / 1370mm × 100m; 1520mm × 50m / 1520mm × 100m |
| Appearance | Transparent |
| Indoor / outdoor | Indoor |
| Shelf life |
Installation
- The application area should be clean and free of dirt.
- Using water to assist applying the material is not necessary and not recommended.
Storage
- Store at temperature conditions of 10～25℃ (50～77℉) and 50% relative humidity.
- We recommended that you always keep this product in its original packaging.
Cautions
- Due to different applying surfaces and environments, we cannot guarantee the material will work in every condition. Please test on the applying surface before large-scale use.
Where SP-TAPE60Z goes to work
Common questions about SP-TAPE60Z
Q1What is FreePost® double-sided tape used for?
FreePost® double-sided tape laminates onto the back of any printed graphic and turns it into a removable window or wall cling. One side is a high-tack permanent adhesive that bonds to the print; the other is a FreePost® removable cling layer — Easy Cling™ flat cling, WALLIZARD® micro-dot or Spider™ dot adhesive — that applies to glass or smooth walls and peels away without residue.
Q2Which FreePost® tape model should I choose?
Match the removable side to your application: EC-TAPE70 uses the Easy Cling™ flat cling layer, WL-TAPE60 the WALLIZARD® micro-dot layer, and SP-TAPE60Z the Spider™ dot layer for a stronger removable hold. DAC-TAPE140 carries high-tack permanent adhesive on both sides for long-term mounting. All four are supplied in rolls; detailed adhesion values are available on request.
Q3Can FreePost® double-sided tape be printed on?
No. The tape is a laminating and mounting product, not a print medium. Print your graphic on a suitable film or paper first, then laminate the tape's permanent side to the back of the print and apply the removable side to glass or a smooth wall.
Other models in this series
4 models in total — view the full comparison table →
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test SP-TAPE60Z on your own printer
We ship A4 and roll samples worldwide. Tell us your printer model and target surface — our engineers will confirm compatibility and quote within one working day.